Skip to content
dibs

ENGR 1IT

Introduction to Engineering Design: Internet of Things

2 units

Sections & times

Lecture and lab.

Fall 2026: 1 lecture and 3 discussions. 1 lecture and 2 discussions are open. The oldest of these readings was 84 minutes ago.

Grades

3.99

Average grade awarded in ENGR 1IT. Not a student rating: this is what the grades were.

In the A range

99%

of the 176 letter grades

D, F or W

0.0%

of every letter grade awarded, plus withdrawals

Taken pass/no pass

-

the registrar has this letter grade only this term

The registrar's own records: 176 grades over 4 terms, Fall 2021 to Fall 2025. Every instructor is pooled here.

What is inside that record

1 of those terms is a summer session, and summer sessions are counted here.

The table below splits them, and term averages across those 4 terms ran 3.98 to 4.00.

Historical grades for DARABI, HOOMAN, across recorded terms. The course summary above includes all professors.

  • A+ 98 · 55.7%
  • A 73 · 41.5%
  • A- 4 · 2.3%
  • B 1 · 0.6%

Percentages are of the 176 letter grades. Grey bars are non-letter outcomes.

How the non-letter outcomes are counted

They are excluded from the GPA entirely rather than scored, because counting a P as a 4.0 would be a fabrication.

By instructor

Predicted GPA, raw average, sample size, terms, A range and the workload reviewers reported for every instructor with a grade record in this course
Instructor Predicted GPA Raw n Terms A range Workload Fall 2026
DARABI, HOOMAN reviews ↗ 3.99 3.99 176 4 99% - Open, 11 seats left
Why Predicted is not the Raw average

“Predicted” is shrunk toward the course average, which is itself shrunk toward the department, so an instructor with a handful of students sits near the course mean rather than topping the list.

Grade records describe outcomes. For what a course is like to take, read student reviews written on dibs below or follow the separate external review link.

Reviews for ENGR 1IT

Workload and assignments

Work types reported in BruinWalk reviews of this course, across recorded instructors and terms. They may differ from this term's syllabus.

dibs has not read this course’s reviews, so it cannot say what kind of work it sets. That is dibs not having looked. It is not a course without papers or exams, and the reviews linked below are the answer until dibs catches up.

Read the source reviews

From the registrar's catalog

(Formerly numbered 96I.) Lecture, one hour; laboratory, one hour; outside study, four hours. Recommended for undergraduate Aerospace Engineering, Bioengineering, Computer Science, Electrical Engineering, and Mechanical Engineering majors. Introduction to engineering design while building teamwork and communication skills and examination of engineering majors offered at UCLA and of engineering careers. Hands-on experience with state-of-art Internet of things (IoT) technology to offer students opportunity to rapidly develop innovative and inspiring systems that provide ideal introduction to computing systems and IoT applications specific to their major field. IoT technology has become one of the most important advances in technology history with applications ranging from wearable devices for healthcare to residential monitoring systems, natural resource protection and management, intelligent vehicles and transportation systems, robotics systems, and energy conservation. Completion of hands-on engineering design projects, preparation of short report describing projects, and presentation of results. Letter grading.

Sections in Fall 2026

You enroll in the discussion, not the lecture, so a discussion's status is the one that decides whether you get in. A lecture can read open while every discussion under it is full.

Seat counts as of : the oldest of these 4 readings. Seat readings are snapshots, not live availability. Their timestamps show when dibs last checked.

Final enrollment, averaged across each term's sections: between 35 and 48 a term over 3 terms, summer excluded, most recently 48 in Fall 2025. That is the shape across years, not this term, which is above.

From the people who took it

Student reviews

What taking ENGR 1IT was like: the work, the teaching, and what students wish they’d known.

Your experience could be the first.

No student reviews are available to read on dibs for this course yet. Took it? Tell the next person what helped, what was hard, and how you spent your time.

Looking for more perspectives?

External reviews are separate and do not count toward the dibs rating.

Read reviews on BruinWalk

Community guidelines

Seats over time in Fall 2026

How each lecture has filled since dibs first saw it.

A dot is a reading where something moved: the seat count, the status, or the waitlist.

What a flat run means, and where a line starts

Flat between dots means it did not drift, it held and then jumped, and a line starts when dibs first saw that lecture rather than reaching back before it existed. A lecture that has never moved draws a flat line across the whole window, and one with two or three readings draws a line joining them, which is too few to read a trend from.

Lec 1 · Darabi, H. · 61 of 72 enrolled

Filled by 20 over about 1 month

61 of 72 · 11 left in its discussions
18 Aug 20:409 Sep 21:561 Oct 23:12
dibs read 168 of the 758 hours its hourly record covers, 22%, and did not look in 590. dibs had no hourly record before 31 Aug, which is the other 302 of 1060 plotted.61 of 72 enrolled at the newest reading, 84 minutes ago, with 11 left in its discussions. Seats from 18 Aug 20:40 to 1 Oct 23:12, 41 to 61. dibs read 168 of the 758 hours its hourly record here covers, 22%. An hour marked as read confirms a check, not continuous monitoring. That check recorded no change; changes between checks may be missed. For 590 hours dibs was keeping a record and did not reach this section. Nothing before 31 August at 10:00, where this section's record starts, has a read either way, which is 302 hours of this window. Where the drawing is faint or broken, that never means the readings are doubtful. It means the stretch between them is unaccounted for.
How readings and alerts work

A reading and an hourly record are different things, and most charts here hold more of the second missing than present. dibs has taken readings of a section since long before it began keeping an hour-by-hour log of when it looked, so the empty stretches are dibs saying it was not keeping that log yet, not that it looked and found nothing. That is the age of the record and not a fault.

Seat counts show the last successful read, not live availability. Refreshes can be delayed by request limits or upstream interruptions. Watched sections receive priority, but an hourly update for every section is not guaranteed.

The registrar can change a seat count between our checks. Alerts depend on dibs detecting an opening and completing delivery; a quiet watch does not prove that no seat opened. Check the registrar before enrolling.